|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
L-MPS HORIZ. MOUNTING DIRECTLY ON WALL (Rear View)
L-MPS VERT. MOUNTING WITH WALL BRACKET (Rear View)
SPEAKER
(3) Screws (fasten to speaker)
Wood Screws (fasten to wall stud) Slide Speaker Down Onto Wood Screws
FIGURE 6. For horizontal mounting of the L-MPS speaker directly on a wall, fasten the wood screws (not included) to a desired wall stud, leaving a 1 �8 " clearance between the screw head and the wall. Rotate the L-MPS speaker horizontally, align the keyholes on the rear of the speaker with the wood screws, and slide speaker down.
MOUNTING BRACKET
MOUNTING BRACKET ON SPEAKER
Wood Screws (fasten to wall stud)
Slide Speaker With Bracket Down Onto Wood Screws
FIGURE 7. For vertical mounting of the L-MPS speaker on a wall using the enclosed bracket, fasten the bracket (as shown) with wood screws (not included) to a desired wall stud. Leave a 1 � 8 " clearance between the screw head and the wall. Then remove the bracket and firmly attach it to the back of the speaker using the enclosed screws. Finally, align the bracket�s keyholes with the wood screws in the wall, and slide the speaker (with bracket) down. NOTE: The above illustration shows the L-MPS speaker being mounted with a downward tilt. Other orientations are possible by rotating the mounting bracket before fastening it to the speaker.
4
|
|
|
> |
|
